Jeil SNA VIBRO HAMMER

GENERAL TYPE
Certified with Europe CE standard
Ready to work any work place in the world.Our original design, easy for maintenance

MACHINE FEATURES

• Outstanding workability and mobility.
• Easier operate when there is not enough vertical clearance above the foundation to permit use of a conventional pile hammer such as downtown area, bridge area and the vicinity of high-voltage electricity power lines than crane hammer does.
• Equipped with bigger vibration force powered by hydraulic motors and optimal bearings for high frequency vibration.
• Install vibro-isolating rubber for high frequency purpose.
• Easier connect and disconnect hydraulic hose lines to hammer from excavator.
• 360-degree swing for operator convenience.
• Comfortable driving and extraction of sheet pile, H-pile and tube pile with wire hanging method.
• The clamping lug can handle and move construction materials easily.
• Pile driving power improved by 20% compared to the existing equipments.
• Rigid clamping by Hardox inside.
• Lower cost of maintenance than crane hammer.

MODEL	VIBRATING HAMMER	KTVH200	KTVH300
CARRIER WEIGHT(TON)	TON	18.0 ~ 26.0	27.0 ~ 32.0
CARRIER WEIGHT(TON)	LBS	39,683 ~ 57,320	59,525 ~ 70,548
WAY OF OPERATION	TYPE	VERTICAL	VERTICAL
OPERATING WEIGHT OF VIBRATING HAMMER)	KGS	1720	1800
OPERATING WEIGHT OF VIBRATING HAMMER)	LBS	3792	3968
OPERATING WEIGHT OF EXTENSION BOOM	KGS	600	700
OPERATING WEIGHT OF EXTENSION BOOM	LBS	1323	1543
RELIEF / SETTING PRESSURE OF MACHINE / CARRIER	KG/CM2	180 ~ 200	200 ~ 250
RELIEF / SETTING PRESSURE OF MACHINE / CARRIER	PSI	2,562 ~ 2,846	2,846 ~ 3,558
OPERATING PRESSURE OF VIBRATING HAMMER	KG/CM2	180 ~ 200	200 ~ 250
OPERATING PRESSURE OF VIBRATING HAMMER	PSI	2,562 ~ 2,846	2,846 ~ 3,558
OIL SUPPLY / OIL FLOW FOR VIBRATING HAMMER	LPM ( L / MIN )	130 ~ 180	170 ~ 200
OIL SUPPLY / OIL FLOW FOR VIBRATING HAMMER	GPM ( G / MIN )	34.32 ~ 47.52	44.88 ~ 52.80
IMPACT / STRIKING FREQUENCY	BPM ( BLOW PER MINUTE )	2,000 ~ 2,500	2,000 ~ 2,500
CENTRIFUGAL FORCE ( = ECENTRIC FORCE)	KN	300	390
CLAMPING JAW	LENGTH - MM	564	564
	LENGTH - INCH	22	22
	WIDTH - MM	260	260
	WIDTH - INCH	10	10
	HEIGHT - MM	695	695
	HEIGHT - INCH	27	27
OVERALL OPERATING - SIZE (OF VIBRATING HAMMER + WITH MOUNTING CAP)	LENGTH - MM	730	730
	LENGTH - INCH	29	29
	WIDTH - MM	1140	1140
	WIDTH - INCH	44	44
	HEIGHT - MM	2030	2030
	HEIGHT - INCH	80	80